Dynamix 4-Band VDSL CO/CPE Modem Manual de usuario descargar pdf (Pagina 7)

VDSL2 CO&CPE Modem USER’S MANUAL Ver.A9

Return to the catalogue.

General Rules

Before making any connections to the VDSL2 CO/CPE MODEM, note the following rules:

Ethernet Port (RJ-45)

All network connections to the Modem Ethernet port must be made using Category 5 UTP for 100Mbps;

Category 3,4 UTP for 10Mbps

No more than 100 meters of cabling may be use between the MUX or HUB and an end node.

Phone Port (RJ-11)

All Phone set connections to the RJ-11 Port made using 24~26 Gauge phone wiring.

Connecting the VDSL2 CO/CPE MODEM

The VDSL2 CO/CPE MODEM can be controlled by a PC, henceforth, called the "Control PC". For this purpose, you

need

a PC with an Ethernet network interface and a DB-9 RS232 serial interface. Two programs are required: A Web

browser is mandatory and a terminal program should be available optionally.

The board has several connectors.

• 4 Ethernet RJ45 jacks (connect LAN devices to route); the Auto MDIX feature of the ports switches

automatically between MDI and MDI-X (MDI = Media Dependant Interface), therefore straight Ethernet cables

can be used.

• 2 x RJ11 jack (LINE Port is for connects VDSL client side to Line Interface, Phone port is for connects phone set

or FAX machine)

1 2 3 4 5 6 7 8 9 10 11 12 ... 74 75

Sin comentarios

Dynamix 4-Band VDSL CO/CPE Modem Manual de usuario Pagina 7