Dynamix UM-SB Manual de usuario descargar pdf (Pagina 39)

Dynamix UM-SB Series User Manual V0.06

TCPAM16 ; data rate is 384Kbps ~ 7680Kbps (Nx128kbps, N=3~60)

For using Annex A or B

TCPAM16 ; 384Kbps ~ 4608Kbps (Nx128kbps, N=3~36)

2-wire model

4-wire model

Annex A/B

TCPAM-16

192~2304 kbps

384~4608 kbps

Annex AF/BG

TCPAM-16

192~3840 kpbs

384~7680 kbps

TCPAM-32

768~5696 kpbs

1536~11392 kbps

This is an index of line connection quality. You can see the actual SNR margin in STATUS

SHDSL.bis. The larger is SNR margin, the better is line connection quality.

The range of SNR Margin is -10 to 21.

If you set SNR margin in the field as 3, the SHDSL.bis connection will drop and reconnect when

the SNR margin is lower than 3. On the other hand, the device will reduce the line rate and

reconnect for better line connection quality.

There have two TC layer setting on this router: EFM layer and ATM layer. According which

networks connected: ATM based access networks or Ethernet based access networks

For adaptive mode, you have to Enable this Line Probe. The router will adapt the data rate

according to the line status.

The screen will prompt the parameters that will be written in NVRAM. Check the parameters

before writing in NVRAM.

Press Restart to restart the router working with new parameters or press continue to setup another

parameter.

The router can support up to 8 PVCs. WAN 1 was configured via BASIC menu except QoS. If you

want to setup another PVCs such as WAN 2 to 7, those parameters are setup on the pages of

WAN under ADVANCED. On the other hand, you don’t need to setup WAN except you apply two

or more Internet Services with ISPs.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 142 143

Sin comentarios

Dynamix UM-SB Manual de usuario Pagina 39