Dynamix DW 2 FXO Manual de usuario Pagina 34

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 33
FIRMWARE VERSION 1.0.10.9 GXW40XX USER MANUAL Page 34 of
60
NAT UDP timeout
NAT UDP timeout in seconds.
Note: This option is not present on GXW4024
Uplink Bandwidth
ISP specified WAN uplink bandwidth
Note: This option is not present on GXW4024
Downlink Bandwidth
ISP specified WAN downlink bandwidth
Note: This option is not present on GXW4024
Enable UPnP support
If set to “Yes”, the GXW40XX would act as an UPnP gateway for your UPnP enable
applications. UPnP - Universal Plug n Play
Note: This option is not present on GXW4024
Reply to ICMP on WAN port
If set to “Yes”, the GXW40XX will respond to the PING. Default is No.
“Yes” setting may make the gateway vulnerable to a Denial of Service attack.
Note: This option is not present on GXW4024
WAN side HTTP/Telnet
Access
If set to “Yes”, user can access the configuration page through the WAN port,
instead of through the “PC” port. WARNING: this configuration is less secure than
default option. Default is No.
Note: This option is not present on GXW4024
Cloned WAN MAC Address
This allows you to change/set the MAC address on the WAN interface.
Note: This option is not present on GXW4024
Enable LAN DHCP
Default is Yes.
Note: This option is not present on GXW4024
LAN Subnet Mask
Sets the LAN subnet mask. Default value is 255.255.255.0
Note: This option is not present on GXW4024
LAN DHCP Base IP
Base IP for the LAN port which functions as a Gateway for the subnet.
Default value is 192.168.2.1.
When the device detects WAN IP is conflicting with LAN IP, the LAN base IP
address will be changed based on the network mask -- the effective subnet will be
increased by 1. For example; 192.168.2.1 will be changed to 192.168.3.1 if net
mask is 255.255.255.0. Then the device will reboot
Note: This option is not present on GXW4024
LAN DHCP Start IP
Default is 100
Note: This option is not present on GXW4024
LAN DHCP End IP
Default is 199
Note: This option is not present on GXW4024
Vista de pagina 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 59 60

Comentarios a estos manuales

Sin comentarios