Dynamix DW 2 FXO Manual de usuario descargar pdf (Pagina 35)

FIRMWARE VERSION 1.0.10.9 GXW40XX USER MANUAL Page 35 of

DHCP IP Lease Time

Value is set in units of hours. Default value is 120 hrs (5 Days.) The time IP

address is assigned to the LAN clients.

Note: This option is not present on GXW4024

DMZ IP

Forward all WAN IP traffic to a specific IP address if no matching port is used by

GXW40XX or defined in port forwarding.

Note: This option is not present on GXW4024

Port Forwarding

Forwards a matching (TCP/UDP) port to a specific LAN IP address with a specific

(TCP/UDP) port.

Note: This option is not present on GXW4024

In addition to the Basic Settings configuration page, end users also has access to the Device Status page.

TABLE 8: STATUS PAGE

MAC Address

The device ID in hexadecimal format. This is needed for Internet Service Provider

troubleshooting. Note: there are separate MAC addresses for the WAN side and the

LAN side. The LAN MAC address will be used for provisioning and can be found on the

label on original box and on the label located on the bottom panel of the device.

WAN IP Address

Shows WAN IP address of GXW40XX

Product Model

Contains the product model info.

Software Version

Program: This is the main software release. Boot and Loader are not changed often.

System Up Time

Shows system uptime since the last reboot.

PPPoE Link Up

Shows whether the PPPoE connection is running if connected to DSL modem.

NAT

Shows type of NAT the GXW40XX is connected to via its WAN port. It is based on

STUN protocol.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

Sin comentarios

Dynamix DW 2 FXO Manual de usuario Pagina 35