Dynamix 4-Band VDSL CO/CPE Modem Manual de usuario descargar pdf (Pagina 46)

NVF-800S 4-Band VDSL IP DSLAM USER’S MANUAL Ver.A.3

Return to the catalogue.

4.2.2-4-7. VLAN configuration

A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic

so only members of the VLAN receive traffic from the same VLAN members. Basically, creating a VLAN from a NVF-800S is

logically equivalent of reconnecting a group of network devices to another Layer 2 NVF-800S. However, all the network

devices are still plug into the same NVF-800S physically.

The IP DSLAM supports port-based and protocol-base VLAN in web management page, In the default configuration, VLAN

support is enable and all ports on the NVF-800S belong to default VLAN, VID is 1.

Support Multiple VLAN (IEEE 802.1Q VLAN)

Port-based Tagging rule VLAN is an IEEE 802.1Q specification standard. Therefore, it is possible to create a VLAN across

devices from different NVF-800S venders. IEEE 802.1Q VLAN uses a technique to insert a “tag” into the Ethernet frames.

Tag contains a VLAN Identifier (VID) that indicates the VLAN numbers.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 83 84

Sin comentarios

Dynamix 4-Band VDSL CO/CPE Modem Manual de usuario Pagina 46